I posted a picture on Instagram yesterday and received so many messages along the lines of things I’ve heard many times before, both on IG and at the workshops that I teach, basically: “I love what you do and would love to try this but I wouldn’t even know where to begin!”

So, to help those nervous, embroidery-loving enthusiasts among you, I decided I would take this hoop and show you my start to finish process. Warning: it’s probably going to be rambly and messy (welcome to the inside workings of my brain)!!! But that’s art, right?! At least it is for me and most likely will be for you too.

This is not going to be a quick finish. You’ve heard of Slow Stitching, right? This is that! If you followed along with the Boho Stitch Along last year, you’ll know that embroidering a large piece of fabric takes time. So, grab a piece of fabric that you love and have been wanting to embroider and just put it in a hoop (like I did) and go through this process with me!

I’ll share my work here weekly, along with tips and some fun ideas for adding extra bits to your project.

P.S. I hear there is an amazing embroidery book written by yours truly that can help you learn how to embroider! And if you have that one, I hear there is an equally awesome second embroidery book coming very soon, you know, if you’re interested!

---

Let’s get started!

First off, you will want to choose your fabric. Pick something that you like…you will be spending lots of time looking at every detail of the fabric!

I have chosen this gorgeous design by Kathy Doughty for Free Spirit Fabrics: Magpie Horizon. I love birds, feathers and this color palette, which made this an easy choice of fabric.

My cut of fabric is a fat quarter (which is a quarter yard of fabric, but cut in a square), so I began with unfolding it to decide what section of the fabric I wanted to include in my hoop. The Magpies fit perfectly into a 12″ hoop and so that was an easy decision.

Next step: threads! I have a lot of thread, so I chose 5 colors to get started. I’m not limited to only using those colors…I can add colors any time that I want, but this is a non-intimidating start to a project. Pick 5 colors that coordinate with your fabric.

These are all spools of Perle Cotton thread from Sue Spargo.

At this point, once my fabric is in the hoop and I have trimmed it (leaving about 1 inch all the way around), I prop it up while i’m working on other things and by doing that i’m getting familiar with the elements on the fabric i’ve chosen.

I did this yesterday and this morning I decided to add the words Magpie Dreams to this hoop. What are Magpies known for their love of? Shiny things! And what do I love to include in my embroidery? Shiny things! Beads, sequins, etc.

If you’ve been following along here, you’ll know that in the past I have raved about my Cricut Maker machine for cutting out words to add to embroidery. So that was my next step.

With Cricut’s Design Space app, I was able to type the words Magpie Dreams, change the font to something more swirly, and curve the words so that would fit along the bottom of the hoop. (That is a new feature and I used it for the first time today!)

If you are new to Design Space, here are a few things i’ve learned while working with letters:

• type the full set of words you want to use
• choose your font
• if you want to add a curve to the words, do it at this point
• to make your letters connect, click “Ungroup” and it will make each letter something you can work with individually
• play with the letters…move them around, make them bigger, smaller, etc.
• when you like how they look, you will group them together again by clicking on the first letter and the Shift key. While still holding the Shift key, you will click on each letter in your group of words and it will then group everything you have clicked together.
• I then attach them (the button at the bottom right side)
• And I learned today how important the Weld button is. When you weld the letters, it groups them all together when cutting and you don’t get little bits of letters cut off.  (I may have had to do this 2 or 3 times before I realized the Weld button was going to save my project and sanity…I promised you messy, right?!)

Here’s what it looks like when I am ready to begin cutting the letters out of felt. I load up the mat with the felt pressed to it and the Maker does the rest!

So from there, I pick the words that have been cut out of the felt and I place them upside down and then spray them with the Dritz Spray Adhesive. I love this product because it lets you adhere something without using an iron and it is removable up until the point that you have stitched it to the fabric!

Also, this was an incredibly messy step. Seriously. Just picture me trying to get a photo of putting the words on the fabric while having felt bits stuck to my fingers because of the adhesive spray. (Notice there is no picture here of that step?!! There is a reason for that!)

So, I dealt with the mess and took a picture of the end result instead!

The words will stand out more once I stitch them, but i’m really liking where this project is headed!

And there you have it! By the time another week rolls around, I will have started to embroider on this piece and I will share with you what I have done.

In the meantime, if you have a piece of fabric you’ve been wanting to try this with, it’s probably time for you to pull it out and get started!

---

So to recap the steps for beginning your project this week:

1. Choose your fabric and hoop size.
2. Pick 5 matching threads.
3. Become familiar with your fabric.
4. Choose one area you want to begin stitching.
5. Gather your embroidery tools: scissors, needles, etc.
6. Pick one stitch that you want to try and just get started!

 

---

Note: There are affiliate links included in this post.